View Cart | Checkout | Items:, Value:

spacer

Store Information

spacer
spacer

Best Sellers

Ducting Clamps

Ducting Clamps



Steps over the ducting spiral to give perfect clamping.

Available sizes: 47 - 92mm

find out more

3.54

Fan Pull-Through Kit

Fan Pull-Through Kit



Part number: FPK01

Pull Through Kits are an ideal quick fix solutions. Perfect for Motorsport applicationsor for fans under 12". Each kit is supplied with 4x Pull Through’s, 4x 3mm Rubber Washers, 4x Foam Pads & 4x Push on Buttons.

find out more

7.14

Joining Sleeve 90mm

Joining Sleeve 90mm



Part Number: JS90

An engineered solution to the problem of joining intake hose to ducts.
The Revotec heat shrink sleeves are adhesive lined producing a strong, neat, light and water/vibration proof joint.
They have a shrink ratio of 3:1, ie 90mm will shrink to 30mm.
Simple to use with a heat gun.
Supplied in pairs.

find out more

8.28

Fan Fitting Template

Fan Fitting Template

Revotec are pleased to offer you a FREE Fan Fitting Template.

Simply using a pair of scissors please cut around the desired size and hold to your radiator for an accurate fitting guide.

Please allow up to 3 working days for delivery of your free fitting template.

There is no postage charge on this item.

find out more

Flexible Ducting - Black

Flexible Ducting - Black


Revotec Ltd is one of the UK largest independent stockists of flexible ducting for the Automotive, Industrial and Marine sectors.

We use a Single Layer of Specially formulated Neoprene which is extremely durable and hard wearing fabric. Each length of ducting features an external locking cord, internal bronze coated steel spiral spring to maintain its diameter. All our ducting is engineered to keep air resistance to a minimum.

Our Black Neoprene ducting is suitable for operating temperatures: -50 + 150°C.

Available in 25mm to 203mm internal diameters.

Priced by the metre, supplied in lengths of up to 4 metres.
To order a longer length increase the number in the quantity field.

find out more

150mm x 75mm Air Intake Duct Offset

150mm x 75mm Air Intake Duct Offset



Part Number: ID150-75OS

150mm x 75mm Rectanglar Intake Duct with offset outlet. Designed to fit in 150 mm (6") x 76 mm (3") opening.

Technical Information:
Size: 150mm x 75mm
Material: HDPE
Outlet Size: 63mm or 76mm


find out more

23.94

MGC

MGC



Part number: B-MGC

Kit Contains:
2 x 10" High Power Sucking Fans
Laser cut zinc plated mild steel fan mounting brackets
35mm Revotec Electronic fan controller
Earth wire kit
Bolts & fittings


find out more

292.80

Flexible Ducting - Red

Flexible Ducting - Red


Revotec Ltd is one of the UK largest independent stockists of flexible ducting for the Automotive, Industrial and Marine sectors.

We use a Single Layer of Specially formulated Silicone which is extremely durable and hard wearing fabric. Each length of ducting features an external locking cord, internal bronze coated steel spiral spring to maintain its diameter. All our ducting is engineered to keep air resistance to a minimum.

Our Red Silicone ducting is suitable for operating temperatures: -80 + 310°C.

Available in 25mm to 203mm internal diameters.

Priced by the metre, supplied in lengths of up to 4 metres.
To order a longer length increase the number in the quantity field.

find out more

Hose Joiners

Hose Joiners

CNC Produced, ribbed for maximum sealing and grip
Overall Length: approx 50mm
Material: Aluminium

23 sizes available: 13, 16, 19, 22, 25, 28, 30, 32, 35, 38, 40, 45, 48, 50, 54, 57, 60, 63, 68, 70, 75, 80, 89mm OD.

find out more

Electronic Fan Controller 35mm

Electronic Fan Controller 35mm



Part Number: EFC35

Negative Earth Housing. Fits directly in to a radiator top or bottom hose for direct water contact.

Technical Information:
Supply Voltage: 12v
Space in hose approx: 35mm
Overal length approx: 65mm
Material: Aluminium
Relay Rating: 30 AMPS
Wire Length: 700mm

Supplied With:
2 x Hose Clamps, Relay, Cap, 3 x Cable Ties, Fitting Instructions


find out more

81.90

Ducting Mount 76mm

Ducting Mount 76mm



Part Number: DM76

To suit 76mm Ducting. An engineered solution for securely mounting ducting. Pressed and shaped in Aluminium to securely fix and hold ducting with no damage. Supplied complete with 9mm wide tie wraps. Anodized black. Supplied individually.

find out more

12.00

COMEX 11" (280mm) HIGH POWER FAN

COMEX 11


Revotec are the UK distributor of COMEX Fans.

COMEX 11" (280mm) High Power Fan

Technical Specification:
Volt: 12v
Weight: 1.65kg
Approx Working Current: 9.2amps



Available in a Blowing or Suction format.

find out more

Electronic Fan Controller 38mm

Electronic Fan Controller 38mm



Part Number: EFC38

Negative Earth Housing. Fits directly in to a radiator top or bottom hose for direct water contact.

Technical Information:
Supply Voltage: 12v
Space in hose approx: 38mm
Overal length approx: 65mm
Material: Aluminium
Relay Rating: 30 AMPS
Wire Length: 700mm

Supplied With:
2 x Hose Clamps, Relay, Cap, 3 x Cable Ties, Fitting Instructions


find out more

81.90

Air Outlets

Air Outlets


Spun aluminium outlet for maximum air flow.
Designed for easy fitting to back plate.
Approximatly 15mm wide flange.

Available in 6 sizes.

find out more

spacer

Cooling Kits for Land Rover



Each bespoke Revotec cooling kit uses a selection of quality component parts and the use of a dedicated suction or blowing fan to maximise air flow. Each kit is supplied complete for an easy DIY installation with a Revotec variable Electronic Fan Controller, Engineered laser cut Brackets that are designed to fit with no permanent modifications to your vehicle and a High Power COMEX Electronic Cooling Fan which is High Power and Waterproof to IP68 making the fan ideal for most working conditions found in the 4x4 enviroment.

Each Revotec Land Rover Electronic Fan Conversion kit is an idea replacement the original viscous fan. Eliminate the engine warm up problems giving you a more effective heater, faster engine warm up time, resulting in a better MPG & Performance on your engine.

Land Rover Series 2, 2A and 3Land Rover Series 2, 2A and 3

In stock
Part number: B-LRD-S2/2A/3

NEW KIT, now fits series 2, 2A and 3



Kit Contains:
14" High Power Blowing fan,
Laser cut Powder Coated Steel fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Fan Mounting Feet,
Bolts & fittings.


Price: 174.95 (209.94 Including VAT at 20%)


Quantity:  

Land Rover Series 3 V8Land Rover Series 3 V8

In stock

Part number: B-LRD-S3V8

Kit Contains:
2x 12" High Power Suction fans,
Laser cut aluminium anodised fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.


Price: 244.00 (292.80 Including VAT at 20%)


Quantity:  

Land Rover NINETY / ONE TENLand Rover NINETY / ONE TEN

In stock

Part number: B-LRD-90/110

Kit Contains:
15.2" High Power Suction fan,
Laser cut aluminium anodised fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.

Fitment:
2.5 Petrol
2.5 Diesel
2.5 TD


Price: 179.60 (215.52 Including VAT at 20%)


Quantity:  

Land Rover NINETY / ONE TEN V8Land Rover NINETY / ONE TEN V8

In stock

Part number: B-LRD-90/110-V8

Kit Contains:
2x 12" High Power Suction fans,
Laser cut aluminium anodised fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.


Price: 244.00 (292.80 Including VAT at 20%)


Quantity:  

Land Rover Defender/Discovery 200/300 TDILand Rover Defender/Discovery 200/300 TDI

In stock

Part number: B-LRD-TDI200/300

Kit Contains:
15.2" High Power Suction fan,
Laser cut aluminium fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.



Price: 179.60 (215.52 Including VAT at 20%)


Quantity:  

Land Rover Defender/Discovery 200/300 TDI BLKLand Rover Defender/Discovery 200/300 TDI BLK

In stock

Part number: B-LRD-TDI200/300-BLK

New - Black Anodised Engineered Brackets

Kit Contains:
15.2" High Power Suction fan,
Laser cut aluminium fan mounting brackets,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.



Price: 189.95 (227.94 Including VAT at 20%)


Quantity:  

Land Rover Defender/Discovery TD5Land Rover Defender/Discovery TD5

In stock

Part number: B-LRD-TD5

Kit Contains:
15.2" High Power Suction fan,
Laser cut aluminium fan mounting shroud,
35mm Revotec Electronic fan controller designed for Land Rovers with an extended loom,
Earth wire kit,
Bolts & fittings.



Price: 219.50 (263.40 Including VAT at 20%)


Quantity:  

spacer
spacer